AutoSector.com ®

These new Mexican electric cargo trikes can lean hard into turns

You may remember Mastretta from the first ever entirely made-in-Mexico sports car, the Mastretta MXT. Now the brothers behind the automotive design company are tackling e-bikes, and they’re doing it with the same sporty focus they’ve drawn on in the past. The result is the newly launched Mastretta MX3 electric bike.

The Mastretta MX3 isn’t a typical e-bike though.

It’s not even a typical e-trike.

The three-wheeler uses a tadpole trike design with a pair of wheels in the front, but also incorporates a leaning mechanism and suspension into the front end.

Leaning trikes provide the ride sensation of a typical two-wheel e-bike yet offer increased stability and convenience inherent to a three-wheeled design.

Mastretta’s Tilt Lock System (TLS) allows the rider to lock the MX3 in the vertical position whenever necessary. This can be useful at stop lights so that the rider doesn’t have to put his or her feet down to balance, or to maintain stability when loading or unloading cargo.

Equipped as a cargo e-bike, the Mastretta MX3 offers three locations for cargo storage: in the front, middle, and rear of the frame.

To help slow the bike quickly even when hauling heavy loads, all three wheels are equipped with hydraulic disc brakes.

The battery is mounted as low as possible in the frame to help reduce the center of gravity. Both the fore and middle cargo areas are also fairly low, though the rear cargo rack seems to put the weight fairly high above that rear wheel.

The cargo bike is actually available in four different models that offer different features and payload limits:

  • MX3 CARGO 40: Up to 40 kg (88 lb) of cargo capacity
  • MX3 CARGO 60: Up to 60 kg (132 lb) of cargo capacity
  • MX3 CARGO 80 LONG TAIL: Up to 80 kg (176 lb) of cargo capacity
  • MX3 CARGO 200 TRAILER: Up to 200 kg (440 lb) of cargo capacity

The different models with various accessories can be seen below.

Recent Posts